Configuring The Lan Interface - Huawei EchoLife HG553 User Manual

7 Maintenance Guide

7.2 Configuring the LAN Interface

To configure the LAN parameters, do as follows:
Step 1 Choose A dvanced Setup > LAN in the navigation tree.
Step 2 C hange the pa
T able 7-1 Par
Parameter
IP Address
Subnet Mask
LAN Domain
LAN
MTU:[296-1500]
Enable IGMP
Snooping
Enable/Disab
DHCP Se rver
Start/End IP
Address
Leased Time
(hour)
Step 3 Click Save to save the LAN configuration. Click Save/Reboot to save the LAN
configuration and reboot the terminal to make the new configuration effective.
----End
7-2
rameters refer to Table 7
ameters f or the Local Area Network (LAN) Setup page
Description
It specifies the IP address of the LAN interface of the terminal.
You can access the Web-based configuration utility of the
terminal by using this IP address. If the DHCP function of the
terminal is enabled, the terminal assigns an IP address that is in
the same network segment as that of this interface to a
computer.
If the IP address of the LAN interface is changed, ensure that
the IP address of the
interface of the terminal are in the same network se
this case, you need to enter the new IP address in the
bar of an explorer.
It specifies the subnet mask of the LAN interface.
It specifies the domain to enter the web Web-based
configuration utility
The maximum
LAN interface.
It specifies whether to enable the IGMP Snooping functio
the terminal.
le An IP address pool contains multiple consecutive IP a
that can be assigned to the computers on the LAN. This
parameter specifies the start IP address of the IP address pool
It specifies the end IP address of
It specifies the period during which a computer on the LAN
can use an assigned IP address.
-1. Generally keep the default settings is OK.
computer and the IP address of the LAN
length of the transported IP package of the
the IP address pool.
gment. In
address
n of
ddresses
.