Building Your Own Table Of Numbers - HP 39g+ User Manual

H I N T
Automatic
recalculation

Building your own table of numbers

Build a table
Aplets and their views
Option
Trig
Un-zoom
The display on the right is a Zoom In of the display on the
left. The ZOOM factor is 4.
To jump to an independent variable value in the table,
use the arrow keys to place the cursor in the independent
variable column, then enter the value to jump to.
You can enter any new value in the X column. When you
press , the values for the dependent variables are
recalculated, and the entire table is regenerated with the
same interval between X values.
The default NUMTYPE is "Automatic", which fills the table
with data for regular intervals of the independent (X, T, θ,
or N) variable. With the NUMTYPE option set to "Build
Your Own", you fill the table yourself by typing in the
independent-variable values you want. The dependent
values are then calculated and displayed.
1. Start with an expression defined (in Symbolic view) in
the aplet of your choice. Note: Function, Polar,
Parametric, and Sequence aplets only.
2. In the Numeric Setup (
NUMTYPE: Build Your Own.
3. Open the Numeric view (
4. Clear existing data in the table (
Meaning (Continued)
Changes intervals for independent
variable to π/24 radian or 7.5
1
degrees or 8 / grads. Starts at
3
zero.
Returns the display to the previous
zoom.
), choose
NUM
).
).
CLEAR
2-19