Building Your Own Table Of Numbers - HP 40G User Manual

Downloaded from www.Manualslib.com
The display on the right is a Zoom In of the display on the left.
The ZOOM factor is 4.
H I N T To jump to an independent variable value in the table, use the
arrow keys to place the cursor in the independent variable
column, then enter the value to jump to.
Automatic
You can enter any new value in the X column. When you press
recalculation
recalculated, and the entire table is regenerated with the same
interval between X values.

Building your own table of numbers

The default NUMTYPE is "Automatic", which fills the table
with data for regular intervals of the independent (X, T, θ, or
N) variable. With the NUMTYPE option set to "Build Your
Own", you fill the table yourself by typing in the independent-
variable values you want. The dependent values are then
calculated and displayed.
Build a table
1. Start with an expression defined (in Symbolic view) in
the aplet of your choice. Note: Function, Polar,
Parametric, and Sequence aplets only.
2. In the Numeric Setup (
Build Your Own.
3. Open the Numeric view (
4. Clear existing data in the table (
5. Enter the independent values in the left-hand column.
Type in a number and press
enter them in order, because the
rearrange them. To insert a number between two others,
use
You enter
numbers into
the X column
2-18
manuals search engine
, the values for the dependent variables are
), choose NUMTYPE:
NUM
).
. You do not have to
TPSU•
.
DIT•
).
CLEAR
function can
F1 and F2
entries are
generated
automatically
Aplets and their views