Unpacking The Product; Unfolding The Stroller - Joovy Scooter 33X Series Instruction Manual

Assembling and Using your Stroller
!
To ensure safe operation of your stroller, please follow these

Unpacking the Product

• Carefully remove stroller and all parts from the box
and plastic bag.
• Remove any cardboard packing materials from the
stroller.
• Identify the parts (stroller, front wheel set (2), rear
wheels (2), rear axle and brake set, canopy with
apron (may be attached to frame), bumper bar,
axle locks (2), axle caps (2), hubcaps (2), washers
(2), cup holder, and documents) with the pictures
in Figure 1. Also, extra rear wheel assembly parts
may be included.
• Remove all cardboard and plastic coverings from
any areas of the product. Remove the metal spacer
between the hinges and discard.
• Discard all packaging materials properly. Do not
allow children to play with them.
CAUTION
!
Adult assembly is required for this
product. No Tools Required.

Unfolding the Stroller

• Keep children away from stroller while unfolding.
• Orient the stroller with the handles facing upward and
closest to you.
• If necessary, release the folding lock located on the right
side by lifting the lock off of the extended rivet. See
Figure 2.
• Pull upwards on the handles until the stroller is completely
opened and the latching mechanism on each side is
engaged. See Figure 3.
NOTE: Be careful not to scratch the floor when opening
the stroller.
• Visually check and gently push downward on the
handles to ensure that the stroller is completely opened
and locked before ANY use of the product.
WARNING
!
ALWAYS keep children away from the
stroller when unfolding.
Scooter Instruction Manual
instructions carefully.
Figure 1
Figure 2
Figure 3
Page 2