Auto-On; Brightness And Contrast; Auto-Off And Sleep Timer - Delphi Skyfi 2 Quick Manual

Auto-On

Normally, SKYFi2 turns on whenever
it receives power. If SKYFi2 is wired to
a power source that is always on, you
should disable the "Auto-On" option:
1. Press the "menu" button.
16
2. Use the scroll wheel (or remote) to
select "Auto-On." Press the "XM"
button to confirm selection.
3. Select "Off." Press the "XM"
button to confirm selection.
4. Press the "menu" button to return
to the main menu and then again
to return to normal operation. You
must now use the
turn SKYFi2 on or off.
Adjusting the Brightness
and Contrast
1. Press the "menu" button.
2. Use the scroll wheel (or remote) to
select "Brightness" or "Contrast."
Press the "XM" button.
3. Use the scroll wheel (or remote) to
select the desired level. Press the
"XM" button to confirm.
4. Press the "menu" button to return
to the main menu and then again
to return to normal operation.
button to

Auto-Off and Sleep Timer

You can set SKYFi2 to automatically
shut off between 15 minutes to three
hours after your last input or action.
Use this feature if SKYFi2 continues
to receive power even after you
remove the ignition key; setting Auto-
Off prevents SKYFi2 from draining the
vehicle battery. You may also use
Auto-Off as a "sleep" feature to turn
SKYFi2 off automatically after a period
of time.