Setting Windows 3.1 Printing Options - GCC Technologies Elite XL20ppm User Manual

Setting Windows 3.1 printing options

Now that you have installed the printer software in Windows, there are a number of
settings that you may need to change if you have special printing requirements. Most
users do not need to change these settings.
If you want to change print options:
1.
Paper Source
You choose which paper tray supplies the printer from the Paper Source drop-down
menu.
• If you choose Auto Select, the printer selects the paper tray that holds the paper
• If you choose Tray 1, the printer uses paper from the Elite XL 20ppm's main
• If you choose Tray 2, the printer uses paper from this lower tray (if this extra
• If you choose Tray 3, the printer uses paper from this lower tray (if this extra
• If you choose Manual Feed, the printer waits for you to place paper or other
• If you choose MPFeeder, the printer uses paper from the MultiPurpose feeder.
Click Setup in the "Printers" dialog box. You will see the Setup dialog box.
size selected in the Paper option of the Page Setup dialog box. This option only
works if you have more than one paper tray.
tray.
tray is installed).
tray is installed).
media (transparency film, for example) in the multipurpose feeder. When you
have done this, you must press the Manual Feed key on the printer's control
panel to draw the paper into the printer.
Unlike the Manual Feed option, the printer does not require you to press the
• 3 - 5