Table of Contents
Advertisement
k
PROTECTING IMAGES PROTECT/UNPROTECT
w
MODE
FRAME AND PROTECT/UNPROTECT ALL FRAMES
1
1
0
2
0
2
3
0
1
2
0
0
1
0
2
48
1Set the Mode switch to "
w
".
2Press the "MENU/OK" button to display the
menu screen.
Protection is a setting that prevents images from
being accidentally erased. However, "FORMAT"
erases all images, regardless of a "PROTECT
ALL" setting (➡P.47).
k
Press "d" or "c" to select "
" PROTECT.
UNPROTECT ALL
Removes the protection from all the files.
PROTECT ALL
Protects all the files.
FRAME SET/RESET
Protects or unprotects only the selected file.
1Press "a " or "b " to select "FRAME SET/
RESET", "PROTECT ALL" or "UNPROTECT
ALL".
2Press "MENU/OK" button to confirm your
selection.
FRAME SET
1 Press "d " or "c " to select the file to be
protected.
2 Press the "MENU/OK" button to protect the
file currently displayed.
To protect another file, repeat steps 1 and 2.
To finish protecting files, press the "BACK"
button.
1
0
2
0
N
To stop the procedure mid-way
FRAME RESET
1Press "d" or "c" to select the protected file.
2Press the "MENU/OK" button to unprotect the
displayed file.
PROTECT ALL
Press the "MENU/OK" button to protect all the
files.
UNPROTECT ALL
Press the "MENU/OK" button to unprotect all the
files.
N
If the photographed images are very large,
protecting or unprotecting all the frames may take
some time.
If you want to shoot a picture or a movie during
the procedure, press the "BACK" button. To then
return to protecting or unprotecting all the frames,
1
start the procedure on P.48 from step
.
4
49
Advertisement
Table of Contents
