Table of Contents
Advertisement
ATTACHING THE HANDGRIP
The Handgrip makes the camera easier to hold and reduces the effects of camera shake. It also
reduces fatigue during long photography sessions.
1
2
3
h You cannot replace the batteries or the media while the Handgrip is attached. You must
remove the Handgrip first.
h Avoid setting the camera down on its base when the Handgrip is attached. Always lay the
camera down flat.
18
To attach the Handgrip to the camera, align the
Handgrip mount on the camera with the
protruding lugs on the Handgrip and fit them
together.
Then screw the Handgrip mounting screw into
the camera's tripod mount and tighten firmly.
When using the Handgrip, rotate the Handgrip
until you hear it click.
2
Basic
BASIC OPERATION GUIDE
Photography
You've read the chapter on getting ready and the camera is now set up and ready to take pictures.
The Basic Photography section explains the three basic steps of "taking pictures", "viewing
pictures" and "erasing pictures".
This section describes the camera's functions.
Side of Camera
0
Zoom switch
0
When shooting pictures:
Slide the switch to "
" to zoom
in.
Slide the switch to "
" to zoom
out.
When playing back images:
Slide the switch to "
" to
enlarge the images.
Slide the switch to "
" to
return to normal scale.
DISP button
0
You can use this button to select the LCD
monitor display.
When shooting:
Displays the framing guides.
During playback:
Switches text display on and off or selects
multi-frame playback.
Mode switch
0
Use this switch to switch between the still photography, playback
and movie modes.
Still image: Still photography.
Playback: Photographed image playback and recording sound.
Movie: Movie photography,
Shutter button
0
Use this button to focus and to
operate the shutter.
Flash button
0
Changes the flash setting.
Macro button
0
Use this button to switch to
Macro mode.
2
POWER button
0
Use this button to switch the camera
on and off.
19
Advertisement
Table of Contents
