Table of Contents
Advertisement
BenQ DC 5530 User's Manual
3.2 Capturing Pictures
Follow these steps to take pictures:
1. Frame the shot in the LCD panel.
2. Press the shutter button down halfway to focus and
adjust the exposure.
3. Hold the camera still and press the shutter button.
The focus area frame turns blue and the viewfinder LED
lights green when the camera is in focus and the exposure is
calculated. If the focus or exposure is not suitable, the
frame of the focus area turns yellow and the viewfinder LED flashes red.
If the photographic preview is set to "ON" (3.6.2.5 "Preview" on page 18), a preview of the
captured image will be displayed while the image is being recorded onto the SD card.
3.2.1 Changing Camera Settings
Camera settings can be changed with the five-way
button.
1. SET: Enters the menu page and confirms the
chosen setting.
2. Up/Focus: Scrolls upwards in menus and
enables you to choose the appropriate focus
(macro) setting.
3. Right/Flash: Scrolls right and enables you to
choose the appropriate flash setting.
4. Down/Self-timer: Scrolls downwards, toggles the self-timer on and off, and selects the
desired self-timer mode.
5. Left/Exposure Compensation/Backlight Correction: Scrolls left, toggles the exposure on
and off, and toggles the backlight correction on and off.
3.2.1.1
Changing the Focus
Photographs can be taken with the distance to the subject set by auto focus,
infinity. The settings will be maintained even when the power is turned off or when Auto OFF
is activated.
1. Slide the mode switch to
2. Toggle the
/
Each press of the button selects a macro or landscape mode and displays it on the screen.
or
.
button to select the desired focus mode.
1
5
Using the DC E53
2
3
4
macro, or
7
Advertisement
Table of Contents
