Variable Interior Design - Siemens FI18NP Series Operating Instructions Manual

Variable interior
design
You can vary the shelves inside the
appliance and the containers in the
door to suit your requirements.
Shelves
The height of the glass shelves can be
adapted.
Lift the compartment front and
move it upwards or downwards
into the guiding positions.
Lower the compartment front to the
desired height. The holders engage
into the guiding positions.
Removing the compartments:
Lift the compartment front and move it
into the guiding positions as far as the
openings. Remove the compartment
forwards.
Place the compartment into the guiding
positions openings and press down-
wards. Set the compartment to the
desired height.
Door storage
compartment
Lift the container and remove.
Place the containers at the desired
height and press downwards.
Drawers
To take out, lift the drawers slightly and
take out.
To place in, lift the front of the drawers
slightly and place into the chest of
drawers.
Lower the drawer and slide it
backwards.
Ice cube container
For storing larger amounts of food,
it is possible to remove the ice cube
container.
Note:
Before removing the ice cube container,
switch the ice maker off, see "Ice
maker", page 13.
9