BenQ T2200HD User Manual page 6

Contrast
H. Position
V. Position
Pixel Clock
Phase
OSD H. Position
OSD V. Position
OSD Time
Sharpness
DDC/CI
Information
DCR
Display Mode
6 Adjusting your monitor
* Adjust the contrast level of the screen
* Shift the screen left or right
* Shift the screen up or down
* Adjust the monitor internal sampling clock rate
* Adjust the monitor internal signal phase
* Shift the OSD left or right
* Shift the OSD up or down
* Set OSD display duration time
* Adjust the sharp level of the screen
* Switch "DDC/CI" On or Off
* Show the display information
* Switch "DCR" On or Off
* Switch "Display Mode": Aspect/Full