Connecting The Headset To The Belt Pack; Installing The Belt Pack - 3M C860 Operating Instructions Manual

Headset/Belt Pack Preparation
Connecting the
Headset to the Belt
Pack
Installing the Belt
Pack
8
To connect the headset to the belt pack:
1. Insert the communications plug at the end of the headset cable into the
modular jack in the bottom of the belt pack. See Figure 9.
2. Press the cable into the cable channel on the bottom of the belt pack. See
Figure 9.
• Direct the cable toward the Page button to wear the belt pack on the
right hip.
•
Direct the cable toward the Talk Lane 1 button to wear the belt pack on
the left hip.
Figure 9. Connecting the Headset to the Belt Pack
To install the belt pack into the belt pack:
1. Open the flap at the bottom of the belt pack.
2. Insert the belt pack face up (so that the controls are accessible through the
openings on the belt pack top). See Figure 10.
3. Extend the headset cable as follows:
• Toward the Page button to wear the unit on the right hip.
•
Toward the Talk Lane 1 button to wear the unit on the left hip.
4. Close the flap.
Model C860
 3M 2003
January