Related Manuals for 3M Signature Series
Summary of Contents for 3M Signature Series
- Page 1 Convenience Store Intercom Signature Series C5000 System Models 5408, 5416 and 2475 Operating Instructions...
- Page 2 • This device must accept any interference received including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. 3M™ Information Call 800-328-0033.
-
Page 3: Table Of Contents
Signature Series Front Matter Table of Contents System Description..................1 Introduction ......................1 System Components ....................1 Modes of Operation ....................2 Hold Feature ......................2 Operating Keypad....................3 Multiple Station Selectors..................3 Setting Volume ......................3 Using the C5000................... 4 One Call Station Calling Station Selector.............. -
Page 5: System Description
System Description System Description Introduction The Signature Series, 3M™ C5000 Intercom System, Models 5408 and 5416 Communications Controller provides two-way audio communications between a keypad interface (called a Model 2475 Station Selector) and up to 16 remote Call Stations. It is intended for use in service stations, convenience stores, and other applications. -
Page 6: Modes Of Operation
Signature Series System Description The system has five modes of operation described below: Modes of Operation Standby Mode The system is in this mode when SBY is displayed. :SBY The Standby mode occurs when no station is connected, no key is pressed, and the Station Selector is not in Off Line mode. -
Page 7: Operating Keypad
Signature Series System Description Operating keys are described below. Operating Keypad TALK This key controls talk/listen communications. User presses TALK button to cancel the alert tone and to transmit outbound audio. STD BY This key controls station connection. User presses STD BY (Standby) button to cancel a Call Station or Station Selector connection. -
Page 8: Using The C5000
Signature Series Using the C5000 Using the C5000 One Call Station Calling Station Selector Customer presses “Push for Service” button at Call Station. Station Selector beeps and displays: • Q=01 indicating there is one call in the queue waiting to... -
Page 9: More Than One Call Station Calling Station Selector
Signature Series Using the C5000 A maximum of 16 Call Stations can call the Station Selector. The More Than One Call Station system stores the calls in a queue (list) in the order received. Q in Calling Station Selector the display shows the number of calls in the queue. If in Standby mode, the Station Selector beeps to indicate a call or calls are in the queue. -
Page 10: Calling From Station Selector To Call Station
Signature Series Using the C5000 Press the HOLD key to place the second call on hold. The display shows HOLD = 02 and SBY. Both calls are now : HOLD=02 :SBY on hold. _:Press ‘HOLD’ Press the HOLD key again. -
Page 11: All Call Mode
Audio level is set to the mid level of 8. Error Messages The system displays one error message: NO COMMUNICATION. If this message occurs, call your 3M authorized dealer or call ! E R R O R ! 3M Technical Support at 800-328-0033. -
Page 12: Headset And Belt Pack
Belt Pack See the 3M™ Headset Intercom System, Model C1060, Operating Instructions and the 3M™ Belt Pack Intercom System, Model C860, Operating Instructions for detailed information about headset and belt pack operations. Figure 4. Headset and Belt Pack Controls 1 ON Switch Press the ON switch to turn on the headset or belt pack. -
Page 13: Operating Headsets And Belt Packs
Belt Packs Disable the TALK/LOCK feature on all headsets used with the Model C5000. See the 3M™ Headset Intercom System, Model C1060, Operating Instructions and the 3M™ Belt Pack Intercom System, Model C860, Operating Instructions for detailed information about disabling this feature. -
Page 14: Paging
Signature Series Operating Headsets and Belt Packs 5. When you are finished talking and listening to the customer, press P. • The Call Station is disconnected and the call indicator on the Station Selector turns off. Repeat Steps 2 through 5 to initiate another call. - Page 16 Printed in U.S.A. Food Services Trade Department 3M Center © 3M 2002 July St. Paul, MN 55144-1000 78-6912-0742-3 Rev. B...