Table of Contents
Advertisement
grammed by the user. Numbers of up to 16 digits can
be entered, and entering a "@" produces a 1-second
pause (each "@" counts as one of the 16 characters).
Telephone Numbers Screen
3.6.8 EDIT LOCALITY SCREEN
The Edit > Localities menu parameter (see Figure
3-3) or equivalent buttons in the toolbar are used to
select the screen that sets up and edits localities. As
Table 3-1 Menu and Option Switch Parameter Descriptions
Menu
Parameter
Item
Backlight
Bank Select
Display Mode Select
Monitor
Roaming On-Off
Scan Type Select
Scan Continue
Scan List Save
Tone Type Select
Any Keypad Function
except 0-9
[1] The option switches can also be programmed for any of the functions that are selectable by the keypad keys except 0-9.
For example, scanning can be turned on and off by the FCN SCAN keys and by an option switch programmed for the Scan
function. (The FCN key is not pressed when the alternate function of a key is selected by an option switch.)
Option
Switch [1]
X
On = Turns on briefly when a key is pressed, Off = Always disabled.
X
Selects banks when two or more are programmed (Section 2.4.1).
X
X
Selects the alpha or numeric display mode. The display mode can also be tog-
gled by FCN STR or STR option switch (Section 2.3.4).
X
Turns the monitor mode on and off (Section 2.11.2).
X
Turns roaming on and off (Section 2.9.4).
X
Selects group, system/group, or no scanning (Section 2.6.3).
X
Turns the scan continue feature on and off. This timer limits the amount of
time a message is received while scanning (Section 2.6.9).
X
When "on" is selected, changes to the scan list are saved (Section 2.6.7).
X
Selects the tones that sound (All, Alert, Key, Silent). See Section 2.4.12.
[1]
Programmable Functions: FCN, Scan, SYS, RCL, GRP, CLR, Home, Phone,
Dial, Menu, Squelch Adj., S.A/D, G.A/D, Send, Store,
Monitor.
described in Section 2.3.12, a locality is a single
repeater site, and it is programmed with the repeaters
at that site. Up to approximately 25 LTR-Net or 60
LTR or conventional localities can be programmed.
The functions that can be selected by Edit > Localities
menu are as follows:
Edit > Localities > Create New - Creates a new
locality. The screen that is displayed and its parame-
ters are described in Table 3-2. The frequency band is
selected on the radio type screen (see Section 3.6.2).
Edit > Localities > Edit Existing - Edits a
current locality. The locality to be edited is selected
from a list. The screen that is displayed and its param-
eters are described in Table 3-2.
Edit > Localities > Delete Locality - Deletes a
locality.
Edit > Localities > Test Locality - Creates a locality
that is used for test purposes. Currently, test localities
are not used.
Description
3-10
PROGRAMMING
#
,
,
,
, and
November 2001
Part No. 001-7240-001
Advertisement
Table of Contents
