Table of Contents
Advertisement
Title Bar -
Menu Bar -
Toolbar -
Radio Type
Status/
Being Programmed
Function
Status Bar -
1. Select Edit > Radio Type and the displayed screen
selects the Type, Tier, Frequency Band, and Band-
width of the programming file (Section 3.6.2).
2. Select Edit > Basic Radio Params (Parameters) or
click
to display the following screens which
program other radio-wide parameters:
Basic Parameters - Select this screen by clicking
the tab at the top, and choose the desired configura-
tion for each parameter (Section 3.6.3).
Timing Parameters - Select this screen by clicking
the tab at the top, and choose the desired configura-
tion for each parameter (Section 3.6.4).
Menu Parameters - Select this screen by clicking
the tab at the top. Checking the box enables the
parameter in the menu mode, and the drop down
menu programs the default configuration (Section
3.6.5).
Portable Key - Select this screen by clicking the tab
at the top and then choose the function for each key
from the drop-down menu (Section 3.6.6).
Telephone Numbers - Select this screen by clicking
the tab at the top and then enter the preprogrammed
telephone numbers. (Section 3.6.7).
Figure 3-2 Main Window
3. When all parameters in the Radio Parameters
Screens are programmed, click the OK button to
save all changes or the Cancel button to exit without
saving changes.
3.4.4 LOCALITY PROGRAMMING
In general, a locality is a repeater site. At least
one Locality must be programmed before any Systems
can be programmed, and at least one System must be
programmed before a Group can be programmed and
likewise for banks. Proceed as follows to program
localities (Section 3.6.8):
Create New Locality - Select Edit > Localities >
Create New or click
NOTE: The frequency band is selected in the radio
type screen.
Edit Locality - Select Edit > Localities > Edit
Existing or click
Delete Locality - Select Edit > Localities > Delete
Locality or click
When all parameters in the Locality screen are
programmed, click the OK button to save all changes
3-5
PROGRAMMING
U150
U208
Memory
Memory
Left
Left
in the toolbar.
in the toolbar.
in the toolbar.
November 2001
Part No. 001-7240-001
Advertisement
Table of Contents
