Fujitsu Siemens Computers SCALEOVIEW Q22W-1 Operating Manual page 34

SCALEOVIEW H22-1W/Q22W-1
Having this problem?
Picture position not correct
Picture is shaking
Picture is wrongly adjusted
Picture disturbances (vertical lines)
Picture disturbances
(horizontal lines, picture noise)
The screen becomes darker
26
Check the following points:
The monitor recognises an undefined mode (see the
"Technical data" chapter).
► Press the EXIT/AUTO button to perform the auto-
adjustment of the screen.
► Set the picture position with the OSD menu (see the
"Operation of the monitor" chapter).
► Check whether the data cable for the monitor is
correctly attached to the monitor port on the computer.
► Press the EXIT/AUTO button to perform the auto-
adjustment of the screen.
► Press the SELECT/MENU button to activate the
function Factory Recall . The Auto Processing message
is displayed.
► Press the EXIT/AUTO button to perform the auto-
adjustment of the screen.
► Press the EXIT/AUTO button to perform the auto-
adjustment of the screen.
The background lighting has a limited lifetime. If your
monitor display should become too dark, the background
lighting will have to be exchanged.
► Please contact our help desk.
A26361-K1213-Z120-1-7619, edition 1