Fujitsu Siemens Computers SCALEOVIEW Q22W-1 Operating Manual page 31

Setting functions in the "Advanced" menu
Calling the Advanced setting window
Selecting input signal
Input Select
With this function you switch the monitor from the analogue to the digital mode or to
video mode and vice versa, when more signal sources are connected
The condition is that the graphic card used supports this function.
Displaying monitor data
Resolution
Notifier
The optimum resolution for the SCALEOVIEW H22-1W/Q22W-1 monitor is
1680 x 1050 pixels. With the function activated ( On ), a message appears on the
screen after approx. 30 seconds if a different resolution is set.
Change the resolution to 1680 x 1050 to achieve optimum picture quality. With the
function deactivated ( Off ), no message appears.
Select colour optimisation
Colour
Enhance
This function allows you to select one of the following settings:
Optimal, Office , Photo , Video , Game
Office corresponds to a colour temperature of 6500 K.
If you select Photo , Video or Game , the preset values for colour temperature, hue
and saturation will be deactivated.
Factory Recall Activating the factory settings
With this function all settings are reset to the factory settings without prompting for
confirmation.
Press the SELECT/MENU button to activate the function. The Auto Processing
message is displayed.
Scaling monitor display
Overscan
Switch-on, switch-off
Displaying information
Calling the Information setting window
With this function the model designation, serial number, resolution, H/V frequency,
input signal and polarity of the synchronisation signal are displayed.
A26361-K1213-Z120-1-7619, edition 1
SCALEOVIEW H22-1W/Q22W-1
23