Advertisement
Disassembly (ill. A/ D / F)
1. Disconnect the mains plug!
Be careful with the string
0
limiter blade
. Risk of
injury!
2. Keep the cutting head (a) in
a fixed position and open the
cutting head cover (b) by turn-
ing clockwise as shown in
illustration D.
3. Remove the reel (c).
Remove any remaining string.
Note (ill. E):
If the pressure spring is loose (d)
you can fix it in the reel (c) to
facilitate assembly. For this insert
the pressure spring (d) into the
reel (c) and secure by turning
clockwise.
Assembly (ill. C / E / F / G)
1. Introduce the replacement
7. Trouble-shooting
Problem
String Trimmer ceases
to function.
Cutting strings disappear
into the filament cassette.
Cutting string can no longer
be lengthened.
If you have any problem with your
String Trimmer, please contact
our Customer Service or return
the defective unit together with
a short description of the problem
and, if covered under guarantee,
with a copy of the receipt, directly
to one of the GARDENA Service
Centres listed on the back of
this leaflet.
Disposal :
(in accordance with
RL 2002 / 96 / EC)
14
string (6 m) into the slit of the
partition of the reel so that
two equal lengths (3 m each)
hang out (ill. E).
2. Wind first the upper string (a),
then the lower string (b) clock-
wise onto the reel.
Note: Wind both strings evenly
and firmly. Fix approx. 10 cm
of each of the string ends in the
slits marked with ∅ ∅ 2 opposite
each other according to ill. F.
3. Thread the string ends out-
wards through the eyelets of
the cutting head (a) (ill. G).
Note: When inserting the
string ends, make sure that the
slits with the fixed strings are
exactly behind the eyelets.
4. Insert the reel and pull both
string ends at the same time
Possible cause
No power supply.
Wrong installation of the
filament cassette.
Cutting string used up.
Cutting string jammed.
Cassette not properly mounted.
We expressly point out that,
in accordance with the product
liability law, we are not liable
for any damage caused by our
units if it is due to improper
repair or if parts exchanged are
not original GARDENA parts
or parts approved by us, and,
if the repairs were not carried
out by a GARDENA Service
The product must not be added to normal household waste. It must be
disposed of properly.
until they have noticeably
come out of the slits.
5. (ill. G) Press the reel (c) down
onto the spring (d) and secure
the cutting head cover (b) by
turning anticlockwise until it
stops.
6. (ill. C) To check for proper func-
tion depress the cutting head
9
cover
and pull both string
ends at the same time. If the
unit operates properly both
strings will lengthen. If the
cutting strings are too long,
they will be automatically ad-
justed to the correct length
by the string limiter blade
when the String Trimmer is
being operated.
Ensure correct working
position before switching on
the String Trimmer.
Remedy
Check power supply (e. g. by
means of a voltage tester or by
testing on another socket).
Remove filament cassette and
reinsert (see point 6).
Replace string (see point 6).
Remove filament cassette,
unwind and rewind string (see
point 6.1).
Disassembly / assembly of the
filament cassette (see point 6.1).
Centre or an authorised spe-
cialist. The same applies to
spare parts and accessories.
G
0
Advertisement
