Initial Settings; Adjusting Initial Settings; Selecting The Display Language; Setting The Clock - Pioneer DEH-P6850MP Operation Manual

Initial Settings

Adjusting initial settings

1 1 1
Using the initial settings, you can customize
various system settings to achieve optimal per-
formance from this unit.
1 Function display
Shows the function status.
1 Press SOURCE and hold until the unit
turns off.
2 Press MULTI-CONTROL and hold until
Language select appears in the display.
3 Turn MULTI-CONTROL to select one of
the initial settings.
Turn MULTI-CONTROL clockwise to switch be-
tween the functions in the following order:
Language select (language selection)Clock
(clock)FM step (FM tuning step)AM step
(AM tuning step)Warning tone (warning
tone)Face auto open (face auto open)
AUX1 (auxiliary input 1)AUX2 (auxiliary
input 2)Dimmer (dimmer)Brightness
(brightness)Sub/W control (rear output
and subwoofer controller)Mute (sound mut-
ing/attenuation)Demonstration (feature
demo)Reverse mode (reverse mode)
Ever-scroll (ever scroll)
Use the following instructions to operate each
particular setting.
# You can also switch between the functions in
reverse order by turning MULTI-CONTROL coun-
terclockwise.
# To cancel initial settings, press BAND.

Selecting the display language

For your convenience, this unit equips multi-
ple language display. You can select the lan-
guage best suited to your first language.
1 Use MULTI-CONTROL to select
Language select.
Language select appears in the display.
2 Press MULTI-CONTROL to select the lan-
guage.
Each press of MULTI-CONTROL selects lan-
guages in the following order:
EnglishEspañolPortuguês

Setting the clock

Use these instructions to set the clock.
1 Use MULTI-CONTROL to select Clock.
Clock appears in the display.
2 Push MULTI-CONTROL left or right to
select the segment of the clock display you
wish to set.
Pushing MULTI-CONTROL left or right will se-
lect one segment of the clock display:
HourMinute
As you select segments of the clock display
the segment selected will blink.
3 Push MULTI-CONTROL up or down to
set the clock.
Pushing MULTI-CONTROL up will increase
the selected hour or minute. Pushing
MULTI-CONTROL down will decrease the se-
lected hour or minute.
Section
12
53
En