Threading The Double Chain Stitch Looper Thread - Husqvarna HUSKYLOCK 1002 Handbook

ThREADG
Threading the double chain stitch looper thread (purple) <5-thread model only>
Run the thread in
the sequence illustrated.
Threading the thread
1) Thread the thread as far as step
.
2> While holding the end of the thread, thread the
thread onto the take—up thread guide of the
double chain stitch looper
using the tweezers.
Using the double chain stitch looper threading
mechanism
1)
Open
the material plate cover ((root) to the len.
2) Lift up the looper threading knob.
it After threading the thread
onto
the double chain
stitch looper threading hook, thread
it
through the
double
chain
stitch looper.
4)
While holding the end of the thread, return
the
looper threading knob to its original position
5) Bring the cham stitch looper thread octr the
lower and upper looper threads and straight back
behind two needles with a 6" tail.
6
Close the material plate cover (front).
*x
Wrong
Threading the thread on
the double chain stitch
looper hook
-
17
-