Husqvarna HUSKYLOCK 1002 Handbook page 2

Huskylock sewing machine
Table of Contents

Advertisement

"IMPORTANT SAFETY INSTRUCTIONS"
When using the sewing machine, basic safety precautions should always be followed,
including the following.
"Read all instructions before using."
DANGER
To reduce the risk of electric shock.
1.
The sewing machine should never be left unattended when plugged in. Always unplug this sewing ma
chine from the electrical outlet immediately after using and before cleaning.
2.
Always unplug before relamping. Replace bulb with same type rated 2.4 watts.
\AIAR N IN G
To reduce the risk of burns, fire, electric shock, or injury to persons.
1
Do not allow to be used as a toy. Close attention is necessary when the sewing machine is used by or near children.
2
Use this sewing machine only for its intended use as described in this manual. Use only accessories recommended
by
the manufacturer as contained in this manual.
3
Never operate this sewing machine if it has a damaged cord or plug, if it is not working properly, if it has been
dropped
or damaged, or dropped into water. Return the sewing machine to the nearest authorized dealer or service
center
for examination, repair, electrical or mechanical adjustment.
4
Never operate the sewing machine with any air openings blocked. Keep ventilation openings of the sewing machine
and
toot control free from the accumulation of lint, dust, and loose cloth.
5
Never drop
or insert any object into any opening.
6.
Do
not use
outdoors.
I.
Do not operate where aerosol (spray) products are being used or where oxygen is being administered.
B
To
disconnect,
turn the main switch to the symbol "0" position which represents off, then remove plug from outlet.
9,
Do
not
unplug by pulling on cord. To unplug, grasp the plug, not the cord.
10. Keep
fingers away from all moving parts. Special care is required around the sewing machine needle.
11.
Always
use the proper needle plate, The wrong plate can cause the needle to break.
12. Do
not
use bent needles.
13. Do not pull or push fabric while stitching. It may deflect the needle causing it to break.
14. Swrtch the sewing machine to the symbol "0" position when making any adjustments in the needle area, such as
threading
needle, changing needle, threading bobbin, or changing presser foot, and the like.
15.
Always
unplug
the sewing machine from the electrical outlet when removing covers, lubricating, or when making
any of
the user servicing adjustments mentioned in the instruction manual.
"SAVE THESE INSTRUCTIONS"
'
4
T his sewing machine is intended for household use."

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents