2.4Ghz Wi-Fi Settings; Home Network Settings (2.4Ghz) - Amped Wireless REC15A User Manual

REC15A USER'S GUIDE

2.4GHz WI-FI SETTINGS

2.4GHz Wi-Fi Settings: Home Network Settings (2.4GHz)
The Home Network Settings (2.4GHz) page allows you to adjust
settings for your 2.4GHz Home Network connection. These settings
are for adjusting the Range Extender's Home Network connection
after you have already gone through the Setup Wizard and wish to
adjust your current configurations.
Home Network SSID (2.4GHz): Manually enter the Identification
name of the existing 2.4GHz Home Network you wish to connect to.
Channel Number: Enter the channel number of the Home Network. If
the channel number does not match, a connection will not be
established.
Channel Width: Wi-Fi operates in two separate channel widths, 20Hz and 40Hz. 20Hz allows operation on
channels 1-11, while 40Hz is 5-11. 40Hz allows for faster speeds. Select the channel width you wish to use for
your network. This setting must match that of your Home Network for a successful connection.
28