Using In Wireless Communication - Sony HMZ-T3W Reference Manual

Using in Wireless Communication

Connect the processor unit and the battery unit wirelessly.
Installation Examples and Communication Distance
The processor unit and the battery unit of this system each has an antenna for
wireless communication on the side with the SONY logo. When wirelessly
connecting the processor unit and the battery unit, install them referring to the
following installation examples.
The gray portions in the following diagrams indicate the areas in which wireless
communication is possible.
Flat placement
Top view
Approx. 2.5 m (8.2 feet)
Approx. 5 m (16.4 feet)
Approx. 2.5 m (8.2 feet)
Side view
Ceiling
Approx. 5 m (16.4 feet) With the
Tip
• When the battery unit is placed flat on a horizontal surface, wireless communication is
achieved mainly through radio waves reflected off the ceiling or walls. If the
communication distance is shortened due to your room environment, use the supplied
stand for a longer communication distance.
16
SONY logo
Radio wave
SONY logo
side upward
Placement with the Supplied
Stand
Top view
Approx. 3.5 m (11.5 feet)
Approx. 7 m (23 feet)
Approx. 3.5 m (11.5 feet)
Side view
Face the SONY logo side
toward the battery unit.
Radio wave
Approx. 7 m (23 feet)
SONY logo
Face the SONY logo
side toward the
processor unit.