Sony HMZ-T3 Startup Manual

Head Mounted Display
Startup Guide
Before use, also refer to "Health Precautions" and "Precautions"
in the "Reference Guide."
HMZ-T3
1
Connect
Prepare the following items included in the box.
Head mounted unit Processor unit (1)
and battery unit (1)
AC adaptor (small) AC adaptor (large) AC power cord
(AC-UD10) (1) (AC-L200D) (1) (mains lead) (2)
Before use, charge the battery.
Charging starts when the small AC adaptor and the AC power cord are
connected to the battery unit.
The  (power) indicator is lit in orange during charging, and it goes dark
when charging is complete.
Micro USB cable
(supplied)
Battery unit
Head mounted unit
Printed using VOC (Volatile Organic Compound)-free
vegetable based ink.
© 2013 Sony Corporation Printed in Japan
4-471-976-11(1)
Headphones (1) HDMI cable Micro USB cable (1)
(1.5 m/3 m) (2)
AC adaptor (small) AC power cord (mains
(supplied) lead) (supplied)
To wall outlet
Tips
 You can use the system while
charging, with the AC power cord
connected to the power source.
 It will take about 5 hours to fully
charge the battery, when the
system is turned off.
1
Connect playback equipment and a TV to the
processor unit.
You can watch video from playback equipment on the
TV by connecting the TV to the processor unit with a
High-Speed HDMI cable.
In such a case, set "HDMI pass-through" in "General
Setup" to "On."
Note
HDMI cable (1.5 m) (supplied)
 HDMI pass-through does
not enable simultaneous
video playback on the head
mounted unit and TV.
Blu-ray Disc™ player
Game console
2

Connect headphones.

Connect the miniplug of the
headphones to the headphone
jack.
3
Connect the processor unit to the battery unit.
HDMI cable (3 m) (supplied)
Battery unit
4
Connect the large AC adaptor and the AC power
cord to the processor unit.
Processor unit
(Rear)
5
Turn the system on.
1. Turn the processor unit on.
2. Turn the head mounted
unit on.
6
Turn the playback equipment on.
7
Select the input.
Press the INPUT button on the
processor unit to select the input
for the source equipment. The HDMI
INPUT indicator of the selected input
will light in orange.
Processor unit (Rear)
HDMI IN
TV
Processor unit (Front)
AC power cord
AC adaptor
(mains lead)
(large) (supplied)
(supplied)
2
Adjust and Wear
Continued in
HDMI OUT
(TV)
HDMI cable
(sold separately)
To wall outlet