Mitsubishi Electric PKA-RP-HAL Operation Manual page 11

6. Timer
6.1.3. Auto Off Timer
■
This timer begins countdown when the air conditioner starts and shuts
the air conditioner off when the set time has elapsed.
■
Available settings run from 30 minutes to 4 hours in 30-minute intervals.
Note:
*1. Weekly Timer/Simple Timer/Auto Off Timer cannot be used at the same
time.
*2. The Auto Off timer will not operate when any of the following conditions
is in effect.
The timer is off; the system is in malfunction state; a test run is in prog-
ress; the remote controller is undergoing self-check or remote control-
ler check; the user is in the process of selecting a function; the user is
in the process of setting the timer; the system is under central control.
(Under these conditions, On/Off operation is prohibited.)
AFTER
TEMP.
MENU ON/OFF
BACK MONITOR/SET DAY
PAR-21MAA CLOCK
2 1
<How to Set the Auto Off Timer>
2 3
AFTER
1. Be sure that you are at a standard control screen, and that the Auto
Off timer indicator is visible in the display (at 1).
When something other than the Auto Off Timer is displayed, set it to
AUTO OFF TIMER using the function selection of remote controller
(see 8.[4]-3 (3)) timer function setting.
2. Hold down the Timer Menu button 2 for 3 seconds so that the "Set
Up" appears on the screen (at 2).
(Note that each press of the button toggles the display between "Set
Up" and "Monitor".)
3. Press the appropriate Set Time button 1 as necessary to set the OFF
time (at 3).
4. Press the Filter button 4 to lock in the setting.
Note:
Your entry will be cancelled if you press the Mode (Return) button
4
pressing the Filter button .
5. Press the Mode (Return) button 2 to complete the setting procedure
and return to the standard control screen.
6. If the air conditioner is already running, the timer starts countdown
immediately. Be sure to check that the timer setting appears cor-
rectly on the display.
<Checking the Current Auto Off Timer Setting>
4 5
TIMER
AFTER
1. Be sure that the "Auto Off" is visible on the screen (at
2. Hold down the Timer Menu button 2 for 3 seconds so that "Monitor"
is indicated on the screen (at 4).
• The timer remaining to shutdown appears at 5.
3. To close the monitor and return to the standard control screen, press
the Mode (Return) button 2.
OFF
AUTO OFF
ON/OFF
2
FILTER
4
CHECK TEST
OPERATION CLEAR
9
Timer Setting
OFF
1
AUTO OFF
2
Timer Setting
OFF
1
AUTO OFF
).
1
<To Turn Off the Auto Off Timer...>
●
Hold down the Timer On/Off button 9 for 3 seconds so that "Timer
Off" appears (at 6) and the timer value (at 7) disappears.
6
●
Alternatively, turn off the air conditioner itself. The timer value (at 7)
will disappear from the screen.
<To Turn On the Auto Off Timer...>
●
Hold down the Timer On/Off button 9 for 3 seconds. The "Timer Off"
indication disappears (at 6), and the timer setting comes on the dis-
play (at 7).
●
Alternatively, turn on the air conditioner. The timer value will appear at
7.
6
6.2. For Wireless Remote-controller
AUTO STOP
1 Press the
before
• Time can be set while the following symbol is blinking.
OFF timer : A
ON timer : A
h
2 Use the
and
3 Canceling the timer.
To cancel the OFF timer, press the
To cancel the ON timer, press the
• It is possible to combine both OFF and ON timers.
• Pressing the ON/OFF button of the remote controller during timer
mode to stop the unit will cancel the timers.
• If the current time has not been set, the timer operation cannot be
used.
7
˚C
˚C
AUTO OFF
7
AUTO OFF
7
AFTER OFF
˚C
˚C
AUTO OFF
A
13
2
AUTO START
or button (TIMER SET).
is blinking.
is blinking.
min
buttons to set the desired time.
AUTO STOP
button.
AUTO START
button.
11