Prog; Slow; Setup; Repeat - Hyundai H-DVD5005 Instruction Manual

Dvd player
Table of Contents

Advertisement

Available languages

Available languages

• When playing SVCD, VCD, CD disc, press
NEXT button to go to the next track.

PROG

• If the disc contains 2 or more tracks,
chapters or titles, set up the playing order to
your preference. Press PROG button to enter
program menu.
• Press number buttons to input the number
of the track, title or chapter. If programmed
tracks are over ten, select NEXT item and
press ENTER button to go on programming.
Maximum 20 programmable items are
possible. Use cursor buttons to move the
cursor to START item. Press ENTER button to
start program playback. Press PROG button to
cancel programming.
For MP3 disc, this function is not
available.

SLOW

Press SLOW button repeatedly to change
slow playback speed as follows: X2 => X4 =>
X8 => X16 => normal.

SETUP

Press SETUP button to enter or exit the
system setup menu.
N/P
Press N/P button to select between PAL/
Auto/NTSC video mode. This function is only
available when no disc is inside the unit.

REPEAT

Press REPEAT button to repeat a title,
chapter, track or the whole disc.
• When playing DVD disc, press REPEAT
button continually to repeat chapter => title =>
all => repeat off.
• When playing SVCD, VCD, CD disc, press
REPEAT button continually to repeat track =>
all => repeat off.
• When playing MP3 disc, press REPEAT
button continually to play single => repeat track
=> repeat all => repeat off.
A - B
• Press A-B button at the start point (A)
and the ending point (B) to select the repeat
fragment.
• Press A-B button the third time to cancel
fragment repeat and return to normal play.

DVD/USB

Press this button to switch between disc and
USB playback (if both are inserted into the unit).
Operations with files contained in a USB
storage are the same as for discs.

LANGUAGE

When playing DVD with more than one audio
stream, press this button to select the needed
language.
PBC
Press this button to turn on or off Playback
Control (PBC) function.

DIRECT

If a DVD disc contains a warning or notice
message or an advertisement clip, press this
button to skip them and go directly to the disc
contents.

RESUME

Press this button to go back to current
playback after activating the disc title menu
with TITLE button.

ZOOM

When playing DVD, SVCD, VCD disc, press
ZOOM button to zoom in the picture as follows:
2x => 3x => 4x => normal. In zoom in mode,
press cursor buttons to move the picture for
viewing.

VOLUME+/VOLUME-

Press VOLUME+ button to adjust volume up.
Press VOLUME- button to adjust volume down.

MUTE

Press MUTE button, the sound will be turned
off. Press MUTE button again, the sound will
Operation
9

Advertisement

Table of Contents
loading

This manual is also suitable for:

H-dvd5003

Table of Contents