Denon DVD-2500BTCI Operating Instructions Manual page 34

Function Setup
Speaker Setting
This unit allows you to enjoy multi-channel surround sound such as S.l-channel /7.1-channel
surround.
<Example of basic layout with 7.1 ch surround system>
F= F=
@ @
',on"pe."" 0"')
~
I-G[
'0. 0
I
U
~ "0''''''''''
n
q
SUbwoore,oce'te" ...,,,
JK
Surround speaker (left) Surround speaker (right)
Su"ou,d
boo' ,pe.'e, (len)
n n
Su"ou,d "", ,... ke'
(right)
To make the most of its feature, set up your speakers appropriately by referring to the table below.
Speaker setting options are available in Setup" Quick" HOMI Audio Out .. HOMI Multi(LPCM) or
Setup" Custom" Audio" HOMI Audio Out .. HOMI Multi(LPCM).
How to navigate through the "HOMI Multi(LPCM)" setting
1) Use
[f::./ V']
to select the menu item.
2) Use [f::. / V'] to select setting items.
• Use [RETURN] to go back to the previous screen.
3) Use [<]1
t>]
to select desired options.(Except for "Test Tone" and "Default".)
For "Test Tone":
Use [<]1
t>]
to select "Manual" or "Auto", then press [ENTER].
• The test tone will be output. If you select "Manual", use
[f::.1 V'] to select desired speaker, then use
[<] / [>] to adjust the volume. If you select "Auto", use [<]1
t>]
to adjust the volume of the speaker
that output the test tone.
• If you want to stop the test tone, press [RETURN].
For "Default":
Press [ENTER] to reset the "Delay Time" setting to the default.
4) Press [SETUP] to exit.
31
ENGLISH
Function Setup
Setting items
I
Options
I
Descriptions
Menu
I
Speaker Configuration Front Large* Large:
Select the desired
Small
For the large speakers
speaker to set. Then with strong low frequency
change the setting
Center
Large*
reproduction capabilities.
appropriately by
Small/None
Small:
referring to the
Subwoofer
On*
For the small speakers
descriptions.
which do not provide
Off
strong bass sound
Surround
Large*
None:
Small/None
No speakers.
For "Subwoofer" there is
Surround Back
Large*
only "On" or "Off".
Small/None
Channel Level
Test Tone: OW Select "Off" to deactivate
Test or set the volume for "Test Tone" is the
the "Test Tone" feature.
each speakers. test tone which can
Select "Manual", then
be out put from the
Manual
press [ENTER] to manually
speakers so that you
set the volume for the
can adjust the desired speaker.
volume for each
Select"Auto",then press
speaker.
Auto
[ENTER] to automatically
out put the test tone from
each speakers.
Front Lch
OdBto-12 dB
If you have selected
Center OdBto-12dB
"Manual" in ''Test Tone",
select the desired speaker
Front Rch
o
dB to -12 dB
to set and adjust the
Surround Rch OdB to-12 dB
volume for the selected
Surround Back Rch OdBto-12dB
speaker.
If you have selected
Surround Back Lch OdBto -12 dB
"Auto" in 'Test Tone",
Surround Lch OdBto-12 dB
adjust the volume while
the desired speaker is
Subwoofer OdBto-12 dB
outputting the test tone.