Denon DVD-2500BT Quick Start Manual

Hide thumbs Also See for DVD-2500BT:

Download this manual

Erstelldatum 29.08.2008 14:45:00

BEFORE APPLYING THE UPDATE PLEASE ENSURE YOU HAVE READ AND

FULLY UNDERSTAND THESE INSTRUCTIONS.

Reproduction, publication in electrical or any other from of this software and its documentation

without the express written consent of the rightful owner is forbidden and will be prosecuted by law.

Warning:

Please read though these instructions completely before attempting to update your player. The use of this update is

completely at the owner's risk. DENON can not be held accountable for damage resulting to the player or

associated equipment as a result of improper use of this update.

During the upgrade process it is imperative that you do not switch off the unit's power and/or press any of the

buttons on the unit or remote control unless otherwise instructed.

Nr.

If you have not done so already, please connect

the DVD-2500BT to a monitor using the HDMI

connections (Page 10 of the user manual

Turn on the player and monitor.

Please ensure that you do not have any discs

currently inside the player and the draw is

closed.

To put the BD player into version up mode,

press

quickly

on enclosed RC-1091 following

buttons on the remote control unit in that order:

[9], [8],[7],[6] und [POP UP MENU/ MENU]

The tray will open automatically.

Following message appears on the screen

DVD-2500BT

Description

Seite 1 von 3

Warnung:

Note

Page 1 Please read though these instructions completely before attempting to update your player. The use of this update is completely at the owner’s risk. DENON can not be held accountable for damage resulting to the player or associated equipment as a result of improper use of this update.
Page 2 Erstelldatum 29.08.2008 14:45:00 [F/W- UP] On unit’s display appears following message Load the disc for version up and close the tray by means of button OPEN/CLOSE ( ) on the unit. firmware file: E5J01ED1108DB2.bin Following message appears on the screen The unit reads firmware out of inserted CD- ROM.
Page 3 Your player’s settings will have been returned to their factory defaults. Please re-configure the player (according User manual ) to your requirements. Denon do not advise the loading of any non-official firmware into your DVD player. Doing so could compromise the features and performance of your player.