Help And Advice - BT Freestyle 60 User Manual

Help and advice

If you have any problems using your Freestyle 60, this section will
give you the most common, easy to follow solutions.
Telephone problems
• No dialling tone.
• Telephone will not dial out.
• Telephone cannot receive calls.
• You have dialling tone but the
telephone will not dial out.
21
Freestyle 60 User Guide ~ 2nd Edition ~ 9th July'01 ~ 3946
Possible cause
Telephone not connected to
telephone line.
Mains disconnected.
Power cut.
Handset battery pack is discharged.
You may be trying to use tone dialling
on a pulse dialling exchange.
You are connected to a PBX and are
not dialling the access code.
Solution
Plug the telephone into the
telephone line.
Wait until the power is restored.
Replace handset on base unit for 10
seconds and try again. If this does
not work, disconnect the handset
battery from the handset for 10
minutes. Also disconnect the mains
power.
Then reconnect the base unit to the
mains, then replace the handset on
the base unit for 10 seconds and try
again.
Place the handset on the base
unit and recharge it for 24 hours
ensuring the CHARGING light
is on.
Handset not registered, Register the
handset, see page XX.
See page 19 to change to pulse
dialling.
Use the PBX access code.
See page 19 for more information on
switchboard use.