Transferring Calls - BT Freestyle 60 User Manual

Your additional handset is
registered automatically and you
will hear a long confirmation
beep and the light will stop
flashing.
Check that your additional handset is
registered correctly by pressing the
TALK button and listening for a dial
tone. If you do not hear a dial tone
your additional handset is either out
of range of the base unit or it has not
been registered properly, or the base
unit line cord is not plugged in.
To set the handset number
Each additional handset must
be assigned an identity
number (2, 3 or 4). Your
Quartet 1100 handset is
already registered as
HANDSET 1. A Quartet
additional handset is pre-set as
HANDSET 2. However,
further additional handsets
can be numbered as they are
added.
Press the DIRECTORY button.
Press the SECRECY button.
Enter the handset number
between (2 and 4).
2 - 4
17
Freestyle 60 User Guide ~ 2nd Edition ~ 9th July'01 ~ 3946
Note
Press the DIRECTORY
button. You will hear a beep
confirming that the new
number has been stored.
Note
Make a note of the handset number by
writing it on the directory label on the
additional handset's charger.

Transferring calls

You can transfer calls between handsets
that are registered to the base unit.
To transfer a call
During your call press the
SECRECY button and then the
handset number that you want
to transfer the
call to.
The called handset will ring.
If the call is not answered
within 30 seconds the calling
handset will ring.
Press the TALK button to
speak to the caller.
If after a further 30 seconds
the call is not taken the caller
will be disconnected.