Sportline Solo 910 User Manual page 7

1. Press the MODE button to select the desired feature mode. The
Heart Rate Watch feature modes (displays) are:
• Time
- Set time, date, 12H/24H display mode, and Button Beep ON/OFF
• Alarm
- Set alarm time, turn alarm ON/OFF, turn hourly chime ON/OFF
• Chronograph
- Run chronograph
• CountdownTimer
- Set/run timer countdown
2. Once you have selected a feature mode, to change a setting in that
mode, hold the MODE button down for 2-3 seconds until the
display flashes.
• When in 'Button Beep ON' mode (watch default),
the Sportline Solo 910 Heart Rate Watch will beep
when the buttons are pushed.
3. Once flashing, to set a feature use the ST/STP button to
increase and RESET button to decrease the setting.
4. To move to the next setting, press and release the MODE button.
5. To save new settings after completion, hold the MODE button
down for 2-3 seconds until the display stops flashing.