Using Vent Fan; Using Vent Delay; Using Cooktop Light; Setting Timed Cook - Kenmore 790.8037 Use & Care Manual

USING VENT FAN (Control Panel Feature 20)
The pad controls the 4-speed vent fan. If the vent fan
is OFF the first touch of the Vent pad will turn the fan
on TURBO, second touch HIGH, third touch MEDIUM,
fourth touch LOW,fifth touch OFF.
Example: To set the vent fan speed to HIGH from
the OFF position.
Touch:
1.
2.
NOTE: If the temperature from the range or
cooktop below the oven gets too hot, the vent
fan will automatically turn on to protect the oven.
It may stay on up to an hour to cool the oven.
When this occurs, the Vent pad will not turn the
USING VENT DELAY (Control Panel Feature 21)
The pad controls the vent delay time.
Example: Set the delay time 10 minutes at HIGH
speed from the OFF position.
Touch:
1.
2.
3.
4.
5.
6.
7.
Display Shows:
Display Shows:
EN-16
USING COOKTOP LIGHT (Control Panel Feature 22)
The pad controls the cooktop light. If the light is OFF
the first touch of the light pad will turn the light ON
( high , second touch Nite( )
Example: To set the light for HIGH from the OFF
position.
Touch:
1.
SETTING TIMED COOK (Control Panel Feature )
Example: T
100% powe r.
Touch:
1.
2.
5 3 0
3.

INTERRUPTING COOKING

You can stop the oven during a cycle by opening
the door. The oven stops heating and the fan turns
ff, but the light stays on.
To restart cooking , close the door and Touch.
If you do not want to continue cooking, open the
door and touch

USING ONE TOUCH START

This is a time saving pad that will automatically
start cooking 2 seconds after selected. Numeric key
1 to 6 can be touched for a 1 minute to 6 minute
automatic start cooking feature.
Touch:
1.
2
low and third touch OFF. )
Display Shows:
Display Shows:
Time counting down
Display Shows:
Time counting down
5