Controls And Connection - Hyundai H-LCD4201 Instruction Manual

Controls and connection

Place your LCD TV on a flat surface in a well-ventilated location.
Rear panel
Top panel button description
Button Description
MENU Open the menu or switch among the menus.
TV/AV To switch among the signal source.
VOL-/+ Decrease/increase the sound volume. Adjust functions in menu operation.
CH+/- In TV mode, decrease/increase channel number. Select functions in menu operation.
POWER Enter or leave the standby mode.
Following indicators are situated on the front panel of the TV. Below is the description of their functions.
Infrared Receiver Sensor is intended for reception of the signal from remote control.
Power Indicator
Red indicator lighting, this means the TV is in standby mode;
Red indicator (lighting for 10 seconds) and Yellow or Purple indicator (lighting for 5 seconds) in turn.
This means the TV is in standby mode and the time to turning on the TV is set;
Green or Blue indicator lighting, this means the TV is in normal working condition;
Green or Blue indicator (lighting for 10 seconds) and Red indicator (lighting for 5 seconds) in turn. This
means the TV is in normal mode with setting time to turning off or setting the sleeping TV off mode.
Rear panel terminals and controls
6
Earphone terminal