Table of Contents
Advertisement
Assembly Instructions
This child's wheeled toy conforms to the stipulated safety regulations. Incorrect repairs or
alterations (removal of original parts or addition of other parts etc...) may be a source of danger
to the user.
Use of the Toy
Before use, always check all screws and plug in connections as well as respective safety devices
fit correctly.
Do not transport anything on this product.
This wheeled toy does not have a parking brake system. Therefore, secure the vehicle against
rolling away. Never park the pedal car unattended with a child on it!
Instruct your child how to use the vehicle correctly and draw attention to possible sources of
danger.
Children at play should always be supervised.
The seat of this product can be adjusted to your child's size.
Please bear in mind that there is always a danger of children injuring themselves while using
swings, climbing frames, toy vehicles or similar equipment.
When riding the toy, the child should always wear covered footwear (no open toe shoes or
barefoot riding).
When children are at play, situations may arise which cannot be predicted by the manufacturer
and for which the manufacturer cannot be held responsible.
Never use corrosive or abrasive substances to clean the toy. Never use substances which may
cause pollution of the environment.
For models with air tires, check air pressure periodically (see tire for recommended psi). Due to
the nature of materials used in air tires, it is not recommended for the product to be left in any
one place for too long where solvents or other chemicals, i.e. petrol, may lie. This may result in a
chemical reaction, which could cause the tires to mark the surface such as a vinyl flooring. If in
doubt put something underneath the wheels to cover the floor.
Lubricate the bearing sleeves of the wheels with a few drops of oil every two or three months.
Assembly of the toy vehicle
Please ensure that the vehicle will only be used for playing when assembly has been carried out
correctly, and checked, by an adult.
The toy vehicle must be assembled carefully by an adult person. Study the assembly instructions
carefully before beginning work. Assemble the vehicle in the exact sequence shown by the
letters in the diagrams. The vehicle will function as designed when correctly assembled.
Please note that there is always a danger of injury when working with tools or doing manual
work. Therefore please be careful when assembling this product.
Ensure that your working area is free of possible sources of danger, for example don't leave any
tools lying around. Always dispose packaging material in such a way that it may not cause any
danger. There is always a risk of suffocation if children play with plastic bags!
Bolt all the parts together loosely at first, and check that they have been assembled correctly.
Tighten the locknuts by hand until resistance is felt, then use wrench to finally tighten nuts
completely against resistance (locking device). Then check that all screw connections have been
tightened firmly. Attention: once locknuts have been unscrewed they no longer function
correctly (the locking device is destroyed), and must be replaced.
3
Advertisement
Table of Contents
