Zodiac B3 Owner's Manual
  1. Manuals
  2. Brands
  3. Zodiac Manuals
  4. Swimming Pool Vacuum
  5. B3
  6. Owner's manual

Zodiac B3 Owner's Manual

Hide thumbs Also See for B3:

Advertisement

Table of Contents

See also: Owner's Manual
Owner's Manual
Rainbow Pool Products
PO Box 2388, Mansfield Qld 4122
Telephone STD 61-7-3849 5385
Facsimile STD 61-7-3849 5384
Email: info@rainbowpoolproducts.com.au
Web: www.rainbowpoolproducts.com.au

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the B3 and is the answer not in the manual?

Questions and answers

Related Manuals for Zodiac B3

Summary of Contents for Zodiac B3

  • Page 1 Owner’s Manual Rainbow Pool Products PO Box 2388, Mansfield Qld 4122 Telephone STD 61-7-3849 5385 Facsimile STD 61-7-3849 5384 Email: info@rainbowpoolproducts.com.au Web: www.rainbowpoolproducts.com.au...
  • Page 2 Zodiac Group Australia Pty Ltd (Zodiac) will not be responsible for liner damage caused by a cleaner which is in disrepair, pattern removal from a vinyl liner, or a cleaner used in a pool having an aged or deteriorated liner.

  • Page 3: Product View And Parts

    Always insist on genuine Zodiac ® replacement parts. Non-Zodiac parts are not made to our specifications. They may have an adverse effect on the operation of your Zodiac B3 or may even damage it. Zodiac B3 Complete Cleaner 5. Hose Weight 1.

  • Page 4: Installation

    Installation 1. Before You Start For best Zodiac pool cleaner performance, you will need to follow the following steps of the installation. 1.1 Following manufacturer’s instructions, clean the filter and empty the skimmer and the pump strainer basket. 1.2 If your main drain is connected to the skimmer box, block off access.
  • Page 5 The Zodiac pool cleaner is performing too fast and/ or Reduce AD Flow valve to setting 1 climbing above the level of the water. The Zodiac pool cleaner is performing slowly and /or is not Increase AD Flow valve to setting 3 climbing the pool walls.
  • Page 6 Quick connector to the female hose cuff. 5. Test and adjust water flow with Pool Pulse™ 5.1 Pool Pulse™ measures the required water flow through your Zodiac pool cleaner. Extremity of the hose 5.2 Once the hose sections are assembled, and...

  • Page 7: Fine Tuning Cleaner Performance

    Operation and Maintenance Fine Tuning Cleaner Performance The B3 cycles on/off with the pool filtration pump vacuuming and cleaning all surfaces randomly throughout the pool. The coverage of the cleaner is dependent on the pool’s shape and available water flow. In some pools, adjustments may be necessary to optimise cleaning coverage.

  • Page 8: Clearing/Removing Diaphragm

    Operation and Maintenance Clearing the Diaphragm WARNING To avoid serious injury, turn off the suction pump for the cleaner before performing this step. If the cleaner stops, turn off the suction pump and remove the cleaner from the water, then check the diaphragm for blockage. 1.

  • Page 9: To Reinstall The Diaphragm

    5. Make sure the extension tube swivels freely by spinning it (see Figure 13). Storage and Winterizing Never coil the hose. Store the B3 cleaner out of direct sunlight. When storing for the winter, drain all water from the cleaner. Remove all connectors and adapters from the dedicated suction line or skimmer.

  • Page 10: Troubleshooting

    Troubleshooting If you experience a problem with your Zodiac B3, please follow the troubleshooting steps below to restore performance. If further assistance is required, contact Zodiac ® Technical Support Department at 1800 688 552. Please have your serial number and date of purchase available when you call.

Table of Contents

Save PDF