Goodman TSTATG1152-2 Owner's Manual page 20

OWNER'S MANUAL
CAUTION
Calibration
Under normal circumstances it will not be necessary to adjust
the calibration of the temperature sensor. If calibration is
required, please contact a trained HVAC technician to
correctly perform the following procedure.
Enter advanced setup by sliding the Program Switch to
SET. When the clock is flashing, press the NEXT button for
5 seconds. Do not release the button until this screen
appears.
Press NEXT
to advance
NEXT
Press NEXT
88
:
two times I2:00
AM
MorningEvening
to advance
PM
MTuWThF
SaSu
NEXT Day
Night
Press NEXT
to store the
new value
NEXT
PROGRAM
Slide the Program Switch to OFF or RUN to
return to normal operation.
RUN OFF SET
TSTATG1152-2
When the Cycles Per Hour is
flashing, press and hold the NEXT
button until this screen appears.
88
Press the NEXT button twice
SET
to advance to the calibration
FILTER
screen.
HEAT
COOL
Adjust the temperature
reading using the WARMER
and COOLER buttons, then
press the NEXT button to
store the new value.
Page 20