Changing The Sound - Sony DMX-DVD Operating Instructions Manual

To search for a scene using the time code
(DVD only)
Select "TIMElTEXT" to search for a starting point by
putting in the time code.
1
In step 2, highlight
a.
TIMEITEXT.
'T **:**:**" (playing time of the current title) is
selected.
' Q *
Hints
• When the Control Menu display is turned off, you can
search for a chapter (DVD) or track (CDIDATA COl
DATA DVD) by pressing the number buttons and
O·
~
• The title, chapter, or track number displayed is the
same number recorded on the disc.
• You cannot search for a scene on a DVD+RWI
DVD+R/DVD+R DL using the time code.
34
2
3
Press
O.
"T **:**:**" changes to "T --:--:--."
Input the time code using the number buttons,
then press
O.
For example, to tind the scene at 2 hours, 10
minutes, and 20 seconds after the beginning,
enter "2: 10:20."
Changing the Sound
~
mm
DiJ IiIiIIi:m
IlmiE!Jj]
When playing a DVD VIDEO recorded in multiple
audio formats (PCM or Dolby Digital), you can change
the audio format. If the DVD VIDEO is recorded with
multilingual tracks, you can also change the language.
With CDs, you can select the sound from either the
right or left channel and listen to the sound of the
selected channel through both the right and left
speakers. For example, when playing a disc containing
a song with the vocals on the right channel and the
instruments on the left channel, you can hear the
instruments from both speakers by selecting the left
channel.
1
Press.
+
4 during playback.
The following display appears.
lii!,(i.,11 :
ENGLISH DOLBY DIGITAL 3/2.1
I
2
Press.
+
4 repeatedly to select the desired
audio signal.
• When playing a DVD VIDEO
Depending on the DVD VIDEO, the choice of
language varies.
When 4 digits are displayed, they indicate a
language code. See "Language Code List" on
page 51 to see which language the code
represents. When the same language is
displayed two or more times, the DVD VIDEO
is recorded in multiple audio formats.
• When playing in DVD-VR mode
The types of sound tracks recorded on a disc are
displayed. The default setting is underlined.
Example:
• 1: MAIN (main sound)
• 1: SUB (sub sound)
• 1: MAIN+SUB (main and sub sound)
• When playing a CD
The default setting is underlined.
• STEREO: the standard stereo sound
• IlL: the sound of the left channel (monaural)
• 2/R: the sound of the right channel (monaural)