Flash Upgrade Flow; 5-1.Projector Rs-232 Drivers Installation Guide; 5-2.Start With The Flash Upgrader To Pc - Optoma HD86 Service Manual

Delta Elec. Inc.
5-1.
Projector RS-232 Drivers Installation Guide
The document is to describe a Windows application Pixelworks software "FlashUpgrader" for
projector firmware. Its main purpose is to provide a detailed procedure of upgrading the
application software of a DLP projector.
The system requirement and the installation procedure of "FlashUpgrader" are also included in
the document.
System Requirement
IBM compatible PC.
Windows XP-SP2 operating system.
Power ON and Into Stand-By Mode
1. Make sure that the RS-232 cable is firmly connected between projector and computer
2. Connect the power cord to the projector, and move the power switch in its ON position
(if available) so that projector is in the STAND-BY mode.
5-2.
Start with the FlashUpgrader to PC
The section is to illustrate the procedure to upgrade the application software of a DLP
projector.
Run the "FlashUpgrader.exe", that will automatically launch the RS-232 drivers update.
The following pictures are illustrating the process of the RS-232 Driver installation.
Company Confidential
56
HD86

5. Flash Upgrade Flow

Optoma___________________ Delta________________
2009/08/18