Flash Upgrade Flow; Projector Usb Drivers Installation Guide - Optoma EX785 Service Manual

Delta Elec. Inc.
5-1.

Projector USB Drivers Installation Guide

Ver 6.0.2.0
The document is to describe the Windows application software "Flash-Tool" for projector firmware.
Its main purpose is to provide a detailed procedure of upgrading the application software of a DLP
The system requirement and the installation procedure of "Flash-Tool" are also included in the document.
Note:
The user must have administrative privileges on the target computer in order to
install your driver.
The installation target directory must not write protected.
User also required having the basic knowledge of Windows application installation.
Attention: This utility is for DLP
System Requirement
1. IBM compatible PC.
2. Windows XP-SP2 operating system.
Install Flash-Tool to PC
"Digital Zoom Projector Flash Tool
Run the
drivers update. Following are the dialogues of the Driver Install process as below.
Company Confidential
58
EX785_ EW775

5. Flash Upgrade Flow

DDP2000/3020/2230/243X series projector only.
TM
(Step 1) This is the first page of install dialog.
Click on the "Next" button to continue, or Click on the
"Cancel" button to cancel the installation.
(Step 2) Driver Destination:
Click on the "Change" button to change the default
directory for saving the driver file somewhere else, or
Click on the "Back" button to return to the previous page,
or Click on the "Cancel" button to cancel the installation
Optoma___________________
Vx.y.msi", it will automatically launch the USB
TM
projector.
Delta________________
2010/01/05