Hitachi RAS-18SH3 Instruction Manual page 8

INSTALLING ANTI-MOLD WASABI CASSETTE
1
Open the front panel.
• Do not hold the movable panel
when opening and closing the
front panel.
Front panel
Gripping part
CAUTION
• Do not open the front panel during operation.
It may interrupt the movable panel to work properly.
Be sure to stop the operation first before opening
the front panel.
2
Install the anti-mold wasabi cassette.
Dust Box Housing
Handle
Dust Box Housing
CAUTION
• Do not put your face close to the package when
you open it.
Your eyes or nose may be irritated by wasabi aroma.
• Do NOT eat.
Gripping part
• Remove the dust box housing
• Hold and lift up the front panel.
• Push up the panel support until it
clicks to lock it.
Lower the front panel and fix in
position with the panel support.
• Take out the anti-mold wasabi
cassette from the aluminium bag.
Anti-mold wasabi
cassette
Aluminium bag
•
Slide the anti-mold
wasabi cassette that
has been taken out of
the wrapper directly
into the Dust Box
Housing.
No daily maintenance is required. However,
the effectiveness of anti-mold wasabi cassette
will be lost after approximately 10 years have
elapsed. Replace the anti-mold wasabi cassette
in such event.
– 8 –
Panel support
Do not remove or tear
the aluminium sheet on
the surface nor make a
hole on it.