Advertisement
Quick Links
CARRON DANTE STOVE SE (WOOD BURNING ONLY)
BHC401-406 – Dated 12th Jan 2011
CARRON CAST IRON STOVE
INSTALLATION AND OPERATING INSTRUCTIONS
Carron stoves are imported and distributed in the UK by:
JIG UK Ltd, Hurlingham Business Park, Fulbeck Heath,
A qualified solid fuel engineer must carry out the installation of this stove.
Grantham, Lincolnshire, NG32 3HL
We cannot accept responsibility for products not installed in this way.
All local regulations, including those referring to national and European
email: sales@carron.uk.net freephone: 0808 129 2224
Standards need to be complied with when installing the appliance.
A list of qualified engineers is available from: www.hetas.co.uk
www.carron.uk.net
Advertisement
Related Manuals for CARRON CARRON CAST IRON STOVE
Summary of Contents for CARRON CARRON CAST IRON STOVE
- Page 1 BHC401-406 – Dated 12th Jan 2011 CARRON CAST IRON STOVE INSTALLATION AND OPERATING INSTRUCTIONS Carron stoves are imported and distributed in the UK by: JIG UK Ltd, Hurlingham Business Park, Fulbeck Heath, A qualified solid fuel engineer must carry out the installation of this stove.
- Page 2 12 Pa Flue gas mass flow 4.0 g/s EN13240:2001 Weight of Stove 70.5 Kg THE CARRON STOVE Minimum distance to combustible materials: Behind the stove: 400mm To the side of the stove: 400mm CO at 13% 02: 0.64% Flue gas temperature: 268ºC Efficiency:76.9%...
- Page 3 Do not fill the stove to a level higher than the bricks. The maximum amount of fuel specified for this manual should not be exceeded, overloading can cause excess Fuels suitable for use in your Carron Stove: - smoke. Operation with the door open can also cause excess smoke. The appliance Wood –...
- Page 4 Controlling the stove - Setting the primary air supply (the inlet below the glass door) Carron stoves do not contain asbestos. However, please take care not to disturb any air control – sliding the air control to the right will allow the maximum amount of air into existing asbestos when removing an old stove.