Cable Management - Sony FWD-42LX1 Operating Instructions Manual

Cable management

The display has the cable covers on its back. Before
connecting the cables to the display, pull the cable
covers to open. After connecting the cables to the
display, close the cable covers.
Using the cable holders
You can neatly bundle the cables with the cable
holders (×6) provided. Select six out of eight holes for
the cable holders. Attach the cable holders as shown
in the illustration below.
Speaker cord holder
(Only for the FWD-
42LX1/42LX1E)
Cable cover
Rear
Cable cover (bottom)
When you connect the speakers SS-SP42FW (not
supplied), route the speaker cords through the speaker
cord holders on the rear of the display unit. (Only for
the FWD-42LX1/42LX1E)
Connections
Cable holder
Inset the cable holder into
the hole on the unit and
rotate it about 90 degrees.
1
2
3
15
(GB)