Table of Contents
Advertisement
S
Stern drives are fitted with zinc anodes on their lower
units (refer to your Engine Owner's Manual for their
locations).
Zinc anodes require replacement about every six
months if the boat is operated in salt water. In fresh
water, the zinc anodes can be replaced about once
a year.
If the anodes deteriorate more rapidly than this, there
is probably a stray current problem within the boat
or at the slip or mooring.
If the anodes do not deteriorate, they are not
protecting the other metallic parts of your boat. This
can be caused by loose anodes or by low grade
zinc or by not having a solid electrical contact
between the anode and the metal it contacts, or by
paint on the anode.
If the anodes are deteriorating rapidly, or not at all,
contact your dealer.
NOTICE
DO NOT PAINT BETWEEN THE ZINC AND THE METAL
IT CONTACTS, AND DO NOT PAINT OVER THE ZINC.
205 Sport
6 • E
ECTION
S
LECTRICAL
YSTEM
7. E
LECTRICAL
The following electrical schematics were
generated by electrical CAD designers at the
engineering division for technical reference and
service technicians. Sea Ray
recommend that you attempt to work on the boat's
electrical system yourself.
recommend that you take your boat to your
authorized Sea Ray
Ray
reserves the right to change or update the
®
electrical system on any model at any time
without notice to the consumer and is NOT
obligated to make any updates to units built prior
to changes.
S
CHEMATICS
does not
®
Instead we
dealer for service. Sea
®
6.5
Advertisement
Table of Contents
