Gage Mode; Primary Display - Apeks Quantum Owner's Manual

Gage Mode

If the Quantum is set to Gage Mode (see Dive Settings on page 15), the computer
operates as a basic depth gauge and dive timer. It does not calculate no-decompres-
sion, decompression, or oxygen information. If you make a dive while in Gage
Mode, you must wait 48 hours until you can
use Dive Mode.
Gauge Mode, like Dive Mode, has a primary
display and an alternate display. Pressing
and holding B shows the alternate display.
When the button is released, the computer
switches back to the primary display.
To activate the backlight, press any button.
Pressing MODE will activate the backlight
but not switch any displays.

Primary display

a. GAGE Mode indicator: Alerts you that
the Quantum is in Gage Mode.
b. Current Depth: How deep you are at
any moment during the dive
Quantum Owner's Manual
a
b
c
d
Figure 21.
Gage Mode - Primary Display
e
43