Sound And Volume Controls; Setting The Speakers' Channels - Philips DVP3046 User Manual

Setting the speakers' channels

You can adjust the delay times (centre
and surround only) and volume level for
individual speakers. These adjustments let
you optimise the sound according to your
surroundings and setup.
IMPORTANT!
The speaker settings only available on
Multi-channel audio outputs.
1
Press STOP then, press SYSTEM
MENU.
2
Press 2 repeatedly to select {AUDIO
SETUP PAGE}.
3
Press 34 to highlight {SPEAKER SETUP},
then press 2.
- - Audio Setup Page - -
Analog Output
Digital Audio Setup
Sound Mode
Speaker Setup
CD Upsampling
Night Mode
- - Speaker Setup Page - -
Front Speakers
Center Speaker
Rear Speakers
Subwoofer
Speakers Volume
Speakers Delay
4
Enter its submenu by pressing 2.
5
Press 34 to highlight one of the options
below at a time, then press 2.
{FRONT SPEAKERS, CENTER SPEAKER,
REAR SPEAKERS}
OFF – when no speaker is connected.
LARGE – when connected speakers can
produce low frequency signals below
120Hz.
SMALL – when connected speakers
cannot produce low frequency signals
below 120Hz.
TIPS: The underlined option is the factory default setting.
Press 1 to go back to the previous menu item. Press SETUP to exit the menu item.
01-43_DVP3046_94_eng_RC2

Sound and Volume Controls

{SUBWOOFER}
ON – when a subwoofer is connected.
OFF – when no subwoofer is connected.
{SPEAKER VOLUME} – Volume level
setting for individual speakers (-6dB ~
+6dB).
{SPEAKER DELAY} – Delay times setting
in relation to the listening position/
distance for centre and surround
speakers (1m ~ 10m).
Large
Small
6
Press 1 2 to adjust the setting that best
suit your surround sound needs.
7
Press OK to confirm.
Helpful Hints:
–
the rear speakers are closer to the listener
than the front speakers.
–
generated to help you judge the sound level
of each speaker.
37
- - Speakers Volume Setup - -
Front Left
Front Right
Center
Subwoofer
Rear Right
Rear Left
- - Speakers Distance Setup - -
Center
Subwoofer
Rear Right
Rear Left
Use the longer delay time settings when
The test tone will be automatically
30/06/06, 5:10 PM
0dB0
0dB0
0dB0
0dB0
0dB0
0dB0
1.0M
1.0M
1.0M
1.0M
37