Table of Contents
Advertisement
Remove cold inlet hose from cold water supply.
2.
3.
Turn on cold supply for a short time to run some
water into a bucket or container to clear any
contaminants in the line.
4.
Connect the Y-Connector to the cold water tap.
Check rubber
seal
Check rubber seal,
replace if worn.
5.
Connect the cold inlet hose for the washer and the
dryer to the Y-Connector and tighten them.
6.
Turn on the water tap and check for leaks at all
connection.
www.electrolux.com
Cold water tap
To Washing
Machine
5
Advertisement
Table of Contents
