Care And Cleaning
You must DISCONNECT the appliance from
the electricity supply, before you can carry out
any cleaning or maintenance work.
Clean the appliance only with soap and warm water.
Fully dry all the surfaces.
Do not use alcohol, solvents or chemical
Cleaning The Water Inlet Filter
If your water is very hard or contains traces of lime
deposit, the water inlet filter may become clogged.
It is therefore a good idea to clean it from time to time.
To clean the water inlet filters:
1. Close the water tap.
Remove the water inlet
hose from the water tap.
Clean the filter in the inlet
hose with a stiff brush.
Remove the inlet hose behind the appliance.
Clean the filter in the valve with a stiff brush or a
Re-install the inlet hose. Make sure that the
couplings are tight to prevent leakages.
7. Open the water tap.