Electrolux EFC152NPAW Instruction Manual page 20

37 electrolux troubleshooting
Lid does not close
Freezer is not level. It rocks on the
floor.
Floor is uneven or weak. Freezer rocks
on the.
Light bulb is not on
Led can be blown.
No electric current is reaching the
freezer.
Temperature of outer freezer surface is warm
The freezer temperature is warm when
you touch the freezer.
Louder sound levels whenever freezer is ON
Modern freezers have increased
storage capabilities and more uniform
temperatures.
Louder sound levels when compressor is ON
Freezer operates at higher pressures
during the start of the ON cycle.
Popping or cracking sound when compressor comes ON
Metal parts undergo expansion and
contraction, as in hot water pipes.
This condition can force the cabinet
out of square and misalign the lid.
Be sure floor can support the freezer
properly. Level the floor by putting
wood or metal shims under the part
of the freezer that is not level.
Call a qualified electrician.
See item "freezer does not run".
The freezer is working normally,
removing warm air from inside the
freezer.
They require a high speed
compressor. This condition is normal.
This is normal. Sound will level off or
disappear as freezer continues to run.
This is normal. Sound will level off or
disappear as freezer continues to run.
Bubbling or gurgling sound, like water boiling
Refrigerant (used to cool freezer) is
circulating throughout the system.
Vibrating noise
Freezer is not level. It rocks on the
floor when it is moved slightly.
Floor is uneven or weak. Freezer
rocks on the
Freezer is touching the wall.
Moisture forms on inner freezer walls
Weather is hot and damp, which
increases the internal rate of frost
buildup.
Lid may be slightly open.
Lid is kept open too long or too
frequently.
Moisture forms outside the freezer
Lid is slightly open, causing the cold
air from inside the freezer to meet
warm damp air from outside.
troubleshooting electrolux 38
This is normal.
Adjust the leveling screws.
Be sure the floor can support the
freezer properly. Level the floor by
putting wood or metal shims under
the part of the freezer that is not
level.
Level the freezer or move it slightly.
This is normal.
See item "lid does not close".
Warm air enters the freezer every
time the lid is opened. Open the lid
less often.
See item "lid does not close".