Fisher & Paykel HP60IDCHX2 Installation Instructions And User Manual page 5

If the supply cord of this equipment is damaged it must only be replaced by the manufacturer, its
■ ■
service agent or similarly qualified person in order to avoid a hazard.
Always switch the power off prior to installation, servicing or cleaning the rangehood.
■ ■
Never use the rangehood without the filters in place.
■ ■
Stainless steel or powdercoat is very easily damaged during installation if abraded or knocked
■ ■
by tools. It is recommended to protect the top of the rangehood with cardboard or plastic bag
during the installation to minimise the risk of damage occurring.
A power outlet should be within 750 mm of the motor assembly and can be either on the wall,
■ ■
behind the chimney or in the ceiling.
To comply with electrical safety regulations, this rangehood must be plugged into a socket near
■ ■
the appliance. The socket must be accessible, or have an accessible isolating switch, to enable
the end user to isolate the rangehood from the power for the purpose of internal cleaning or
maintenance.
Ducting accessories are not supplied. All ducting must comply with local requirements and
■ ■
building codes.
Safety and warnings
3