Table of Contents
Advertisement
Operation Press
Display Shows
1. Select
Octave or
Third
Octave
Measure-
ment as
detailed in
Section 3.1
2. Display the
Main
then
menu, then
select
or
Setup
3. Move to
the Setup
selection
menu
4. Move to
the Setup
Screen
5. If required,
change the
weightings to
enable
quick
edit
mode
Select Mode & Setup
Comments
The highlighted option will
be the bandwidth used.
This is the Main menu
screen with the reverse
video cursor highlighting the
Setup option.
This menu allows any of the
available setups for the
chosen narrowdband to be
selected.
Highlight the setup that is to
be used.
This setup will also be
stored and used the next
time the instrument is
switched on.
This screen allows the
following parameters to be
selected:
SLM weightings,
Period measurement on/off,
Measurement Functions,
Frequency range.
Use
and
to select a
field.
Use
and
to change
the entry in the field.
Save the settings by
pressing
again to
resume normal operation.
Press
to return to the
Setup screen.
CEL-450/490 Operators Handbook - Page 33
Hide quick links:
Advertisement
Table of Contents
